Lippert Components Trailer Axle (Standard) - Manual (Page 31)

Rev: 03.14.2014
Page 31
5200 Axle Webpage
Contact us: Lippert Components Inc. - www.lci1.com/customerservice - Phone: (574) 537-8900 - Email: [email protected]
5,200-LB AXLE WHEEL END COMPONENTS
AXLES AND SUSPENSION
Callout Part # Description
A 122065 Rubber plug for lubed grease caps
B
122064 Dust cap, for 2.5" bore, super lube
122071 Dust cap, for 2.5" bore, non-lube
C 122075 Cotter pin
D 122081 Spindle nut, 6 slot
E 119214 Spindle washer, round ID
E1 119215 Spindle washer, for spindle with D-flat
E2 119216 Spindle locking tang washer
Use E1 and E2 in place of C and E if spindle has no hole for cotter pin and has D-flat on all
axles built prior to 2009
F
122090 Outer bearing cone, L44649
124292 Outer bearing cup, L44610
G 122093 Brake Hub-drum, with cups and studs, 6 on 5.50" BC
H
122066 Inner bearing cone, 25580
124287 Inner bearing cup, 25520
I 122088 Grease seal, double lip, 2.25" ID x 3.376" OD
A
B
D
F
G
H
I
C
E
NOTE: This diagram is
for reference only. The
parts specified here are
only available to the
OEM. Please use the parts
listing on the previous
page for replacement part
information.