Canon W7250 - Manual (Page 34)

Print Media You Can Use
8
2-8
Caution
Note
2
Press Paper Source to light the Roll Media lamp.
Pressing Paper Source alternates the selection between Roll Media and Cut
Sheet.
Loading the Roll Media
Follow the procedure below to set the roll media in the roll media tray. If
there are any cut sheets or other paper output in the tray, remove them first.
z If the W7250 is being used without the stand, to avoid tipping the printer
over and damaging it or causing personal injury, never press down or lean
on the roll media tray while it is pulled out of the printer.
z Before changing to a larger media size, open the upper cover and clean the interior
of the printer to ensure that the entire platen is clean. ( Æ P.6-11)
z For more details about the type of roll media that can be loaded in the printer, refer
to Chapter 2 “Print Media That Can Be Used”. ( Æ P.2-2)
Enter Cancel
Cut Sheet
Roll Media
Paper Source Data Message Power
Online