Lippert Components 2 X 3 Slideout System - Manual (Page 3)

SYSTEM
WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING MAY
RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The Lippert 2 x 3 Slideout System is intended for the sole purpose
of extending and retracting the slideout room. Its function
should not be used for any other purpose or reason than to
actuate the slideout room. To use the system for any reason
other than what it is designed for may result in damage to the
coach and/or cause serious personal injury or even death.
Before actuating the system, please keep these things in mind:
1. 1. 1. 1. 1. Parking locations should be clear of obstructions that may
cause damage when the slideout room is actuated.
2. 2. 2. 2. 2. Be sure all persons are clear of the coach prior to the
slideout room actuation.
3. 3. 3. 3. 3. Keep hands and other body parts away from slideout
mechanisms during actuation. Severe injury or death may
result.
4. 4. 4. 4. 4. To optimize slideout actuation, park coach on solid and level
ground.
DESCRIPTION
The Lippert 2 x 3 Slideout System is a rack and pinion style slide system.
Utilizing a bi-directional electric motor to actuate the drive shaft, the slideout
room is extended and retracted from the same source. The actuator has a built-
in automatic clutching feature. The Lippert 2 x 3 Slideout System is designed as
a negative or positive ground system.
The Lippert 2 x 3 Slideout System is mounted into the frame and allows the floor
of the slideout room, in the fully extended position, to be flush with the floor of the
unit, in some circumstances.
There are no serviceable parts within the electric motor. If the motor fails, it must
be replaced.
3