Longshine GFT150 Ver.1.0 - Manual (Page 39)

PS960GLE/ PS965GME Mainboard
35
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels.
Select Enabled to activate each channel separately.
Setting: Disabled, Enabled (Default).
IDE Primary Master/Slave PIO
It allows your system HDD controller to run faster.
Rather than having the BIOS issue with a series of commands that transferring to or from the disk
drive, PIO (Programmed Input/Output) allows the BIOS to communicate with the controller and
CPU directly.
When Auto is selected, the BIOS will select the best available mode.
Setting: Auto (Default), Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary Master/Slave UDMA
It allows your system to improve disk I/O throughput to 33MB/sec with the Ultra DMA33 feature.
Setting: Disabled, Auto.
SATA Mode
Setting: IDE (Default), RAID, AHCI, Disabled
LEGACY Mode Support
Setting: Disabled (Default), Enabled.