Longshine LCS-6080 - Manual (Page 3)

Jan/07 MN2000000069 3
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® 2000/XP will automatically detect and install the correct
driver for the PCI NEC USB 2.0 Card.
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
z Windows® XP Service Pack 1 or later
For Windows® 2000
z Windows® 2000 Service Pack 4 or later