Longshine LCS-8337TXR - Manual (Page 7)

6
3.3 Driver Installation
After attaching this adapter to your computer, you have to install
a driver to activate this adapter. The following instruction uses
Windows XP as the presumed operation system. The screens upon
installing differ slightly from each operation system but the
procedures are familiar. Please refer to the following paragraphs
for instruction:
1. Turn your computer on after plugging this adapter to PCI-E
slot. The “Found New Hardware Wizard” may pop up. Click the
cancel button to close this window.
2. Insert the included CD to your CD Rom drive. Double click on
your CD Rom drive and double click the “Setup” icon.
3. The Welcome window pops up. Click the “Next” button to start
driver installation.