Longshine LCS-8539TXR1 - Manual (Page 4)

Apr/03 3 MNCBAN985B01
F Red On
Off
Connection at 100Mbps
Connection at 10Mbps
L Green On
Off
Flash
Valid Network Connection
No Network Connection
Sending/Receiving Data
Driver Installation
Windows ME
Insert the 10/100 Fast Ethernet CardBus Adaptor into any available PCMCIA Type II slot. Windows will detect the board and attempt
to install driver for it.
1. Windows has found the new hardware
"PCI Ethernet Controller".
Select "Specify the location of the driver (Advanced)". Click
Next to continue.
2. Select “Specify a location” and click “Browse” to select
F:\Cardbus\LAN\WinME where F is CD-ROM drive
Click “Next” to continue.
3. Windows start to install the best driver for this device and click
“Next” to continue.