Longshine LCS-C819 - Manual (Page 16)

19" Rack-mount 12-port Converter Chassis
-13-
Installing the Converter
Once the Converter has been attached to the bracket,
it can be installed into the Chassis. The converters
can go into the Chassis in any order and can be
placed in any available bay.
Special care must be taken to ensure the correct
mating of the power connector. Choose an available
bay and align the converter so that it fits between the
upper and lower guide rails.
Always ensure that the converter power
socket is positioned at the base of the
Chassis.
Never force the Converter into the
Chassis - check power socket position
and alignment.