Longshine LCS-C844 - Manual (Page 26)

21
<Enter> to change the value. Once change the value,
select <SAVE> to apply the changes.
After entering the new IP address. The system will
confirm whether the operation is successful.
NOTE:
Copy the new address down on a piece of paper. You will
need the address when you are going to use Telnet or set
up data transfer/communication connection.
Warning
IP addresses are unique! If an address isn’t available,
please contact the appropriate authorities to apply for one.
Telnet Access
The Device Server is accessible via a Telnet. At the
command prompt type telnet 192.168.0.254 (If
connecting with default IP). You will be prompted to