Longshine LCS-GS9428 - Manual (Page 28)

28
Restart
Restart:
To restart the system, click the “Yes” button. The system restarts and
shows the authentication window. Please fill in the username and password
to continue.
Factory Default
Restore Factory Default:
To restore the factory default value, click the Yes button.
Note: The IP address of the device will also be configured as factory-default
setting, which is 192.168.1.1.
Smart Boot
This Smart Boot page allows users to select the booting flash of the device.
”Active image number” shows the current flash for booting the device. To
change the booting flash, click on your demanding flash in the “Boot image
number” column and click the “Apply” button to execute.