Luma Comfort HCW10B - Manual (Page 9)

9
Say Goodbye to Ugly Products
mid (medium) and low. After pressing the “+” or “-“ buttons, your desired
misting output will be shown on the control panel as indicated in the
diagram below.
4. On the high mist volume setting, the unit’s output is 300 ml/h. On the mid
mist volume setting, the unit’s output is 210 ml/h. On the low mist volume
setting, the unit’s output is 120 ml/h.
S
ETTING THE
H
YGROMETER
1. To set the hygrometer, press the “S” button so that the numbers in the
center of the control panel with the “%” sign light up. Press the “+” and “-“
buttons to set your desired humidity level and wait 5 seconds before
adjusting any other settings. The hygrometer can be set from 30% to 70%
relative humidity.
2. Once your room is at your desired humidity level, the unit will stop adding
mist to the air and the fan and atomizer will turn off. It will restart once the
relative humidity decreases by 5%.
3. If the room’s humidity level is at 70%, you will see this image:
This means “Continue.” If this is displayed on the control panel, it means
the humidity in your room is at the maximum level. Use the “+” and “-“
keys to adjust the humidity level. Otherwise the atomizer and fan will stop
working until the relative humidity drops by 5%, as indicated above.