Maxim Integrated 78Q8430 Linux Driver ARM Platform - Manual (Page 6)

78Q8430 Linux Driver ARM Platform User Guide UG_8430_008
6 Rev. 1.0
2.1.1 8430-tool Command Summary
To display the list of 8430-tool commands and syntax, enter the following at the prompt:
~ $ 8430-tool -h
8430-tool interface -option operand[s]
Options & Operands:
B: BIST run all tests
c: CAM query
[types|map|filter|rule|irq|dump]
types
map
irq
filter _type_ [_filter_nmbr_]
rule _nmbr_
dump [_start_rule_ [_count_]]
C: CAM control
[irq|arc|new|rule|reset]
arc [m|u] [ 2 | 1 thru 7 ] _MAC_addr_
new _type_ _rule_ _rmr_ _rcr_
rule _rule_ [on|off]
irq [on|off]
reset
f: IP Firewall: [on|off]
F: RX Frame Mods
txpadding [on|off]
strip [crc|pad] [on|off]
crc [append|fix] [on|off]
query [strip|crc]
H: HNR: [set [0|1|2] _5_4-byte_words_|send]
J: Jabber: [on|off]
L: WOL
onnow [on|off|set _data1_ _data2_ _data3_ _mask_]
magic [on|off|set _MAC_addr_]
pmectl [on|off]
pmepwr[on|off]
m: RMON counter query
M: RMON counter control
[on|off|clear]
[set _reg_ offset [0|1] _value_]
p: PHY control support
link [100fd | 100hd | 10fd | 10hd]
read _reg_
write _reg_ _value_
mdix [ [auto [on|off]] | on | off ]
pwrsave [on|off] WARNING: For External Clock ONLY!
P: PAUSE support
[frame|macadr|time|threshold|local|send]
frame [user|default]
macadr _user_frame_MAC_addr_
threshold n
time n
local [on|off]
send
Q: Thresholds:
headroom [get|set _value_]
highwater [get|set _value_]
irqdelay [get|set _value_]
txdivisor [get|set _value_]
R: MAC Reset
T: ICMP/TCP Offload Engine(TOE):
on
off