Icc_inituart(), Figure 8: smart card rx/tx timing, E 31) – Maxim Integrated 73S12xxF Software User Manual
Page 31
Advertising
UG_12xxF_016
73S12xxF Software User Guide
Rev. 1.50
31
Figure 8: Smart Card Rx/Tx Timing
ICC_InitUART()
Purpose
Initializes the Smart Card UART for the specified ICC.
Synopsis
Void ICC_InitUART ( IN struct ICC_Init_t *pICC_Init );
Struct {
enum ICC_ID IccId,
Boolean IccDetect,
enum ICC_HZ IccHz,
unsigned char FiDi,
Boolean IccProtocol,
Boolean IccEDCEnabled,
Boolean IccEDCTypeCRC,
Boolean IccParityCheck,
Boolean IccBreakGeneration,
unsigned char IccBreakStartPosition,
unsigned char IccBreakDuration,
unsigned char IccRxRetry,
Boolean IccBreakDetect,
unsigned char IccTxRetry,
TX
EGT < t
TX/RX
BGT < t < BWT (T=1) or WWT (T=0)
RX/TX
t < CWT (T=1) or WWT (T=0)
RX
Advertising