Maxim Integrated MAXQ7667 - Manual (Page 119)

6-25 __________________________________________________________________________________________________________
MAXQ7667 User’s Guide
6.7.8.2 Waveform Output with Gating
This example uses the code from the previous example, with the modification that the primary pin is now the gating input. The output
on the secondary pin is gated when the primary pin is low. The 1/3 duty cycle waveform is output on the secondary pin whenever the
primary pin is held high.
org 0
;
main_top:
move T2V0, #04000h ;
move T2R0, #04000h ;
move T2C0, #0C000h ;
move T2CFG0, #000h
; 0010 0000
; C/T2 0, Timer Mode
; CCF1:0 00, Compare Mode
; T2MD 0, 16-bit Mode
; T2DIV2:0 000, No freq. pre-scaling
; T2CI 0, use system clock
move T2CNB0, #040h
INPUT ON THE
PRIMARY PIN
COUNT
RESUMED
COUNT
SUSPENDED
NOT TO SCALE
OUTPUT ON THE
SECONDARY PIN
Figure 6-7. Waveform Output with Gating