Crestron electronic TPS-6X-DS - Manual (Page 13)

Crestron TPS-6X-DS Docking Station for the TPS-6X
Permanent Lock Mode Ensure the touchpanel is securely placed on the docking station and placed in lock
mode. Then slide the locking pin accessory straight through the slot of the latch of
docking station until the locking pin clicks into place (refer to the illustrations
below).
The locking pin can be installed from the left or right side of the docking station with
the snap of the pin facing in or out of the slot on the latch.
When in permanent lock mode, the touchpanel is permanently secured onto the
docking station. While the locking pin is removable, it is recommended that the user
only use the locking pin when necessary. Refer to the CAUTION below.
TPS-6X-DS Permanent Lock Mode
LOCKING PIN
ACCESSORY
SLOT LOCKING PIN
ACCESSORY
CAUTION: Use caution if this locking pin must be removed. Using excess force
while removing the locking pin once it has been installed can damage the latch of the
docking station and render the locking mechanism unusable.
Operations Guide – DOC. 6576B Docking Station for the TPS-6X: TPS-6X-DS • 9