Maxim Integrated EE-Sim - Manual (Page 20)

page
20
EE-Sim User Guide
3.6 Simulation and Analysis
3.6.1 Running a Simulation and Generating Waveforms
You can use EE-Sim to run an analysis to generate waveforms.
1. Open a design and click the Analysis tab.
2. In the Configure Analysis section, select an option for the Analysis
Selection field:
a. Click AC Analysis and enter a Start Frequency and
Stop Frequency.
b. Click Transient Analysis and enter a Simulation Stop Time.
c. Click Steady-State Analysis and enter a Simulation Stop Time.
d. Click Startup Analysis and enter a Simulation Stop Time.
Note: The parameters vary based on the design. Field labels may also appear as
Startup and Stop Time.
3. Click the Run Analysis button.