Maxim Integrated Teridian V.22 bis Linux Softmodem for 73M1822/73M1922 MicroDAA User Manual
Page 15
V.22BIS Linux Softmodem for 73M1x22 MicroDAA User Guide
UG_1x22_043
15
Rev. 1.4
V
Verbose/Numeric Result Codes Selection
V0
Numeric result codes – Format <CR>digit(s)<CR>
V1
Verbose result codes – Format <CR><LF>word<CR><LF>
V2
Numeric result codes - Format <CR><LF>digit(s)<CR><LF>
Refer also to the Q[n] and X[n] commands
Y
Asynchronous/Synchronous Mode Selection
Y0
Asynchronous mode. No speed buffering, no protocol.
Y1
Synchronous mode. No speed buffering, no protocol.
Y4
Quasi-Synchronous mode. Allows the transmission and reception of
synchronous data through an asynchronous DTE by stripping off start and stop
bits on transmission and adding them on reception (See V42 operation).
Y6
Asynchronous with speed buffering. Allows fixed DTE-DCE speed so
applications do not need to change the communications rate based on
connection results.