Maxim Integrated 73M1822/73M1922 Control Module - Manual (Page 18)

73M1822/73M1922 Control Module User Guide UG_1x22_053
18 Rev. 1.0
5.2.7 M1X22_RING_DETECT_END
This event is generated when the driver detects the end of the ring burst.
Parameters
Data Type Name Description
unsigned int event_id M1X22_RING_DETECT_END .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 Ring burst frequency (in Hz)
unsigned int event_data2 Ring burst duration (in ms)
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.
5.2.8 M1X22_SYNC_LOSS_DETECT
This event is generated when the driver detects the failure of synchronization across the barrier path.
Parameters
Data Type Name Description
unsigned int event_id M1X22_SYNC_LOSS_DETECT .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.
5.2.9 M1X22_OV_DETECT
This event is generated on detection of an over voltage line condition.
Parameters
Data Type Name Description
unsigned int event_id M1X22_OV_DETECT .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.