MF Digital Spectrum 2 Test PRN File - Manual

Generating a PRN file for Spectrum 2 printer.
1) Open up a Spectrum 2 Designer software.
2) Create a design then you should save all projects as a Spectrum 2 designer file for
future implementation. Go to File => Save As… type in a file name.
fig.1 Spectrum 2 Designer software.
3) To generate a PRN file go to File => Print…
4) Highlight a Spectrum2 printer and then check the Print to File box then press
Print button as shown on fig.2.
fig. 2 Check the Print to file box.