MF Digital CD-3703 (Rev: 08/01/02) - Manual (Page 36)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 35
Firmware Updates
From time to time the CD-3000’s internal “firmware” may need updating to add new
features or improve existing functions. Firmware is easily updated by loading a
“Firmware Update CD” into the system. The latest version of firmware will be available
for downloading to your computer from the MediaFORM web site: www.mediaform.com
Once a firmware image file is downloaded, a “Firmware Update CD” can then be written
using a computer, a CD-R/RW recorder, and most popular premastering programs (such
as: Adaptec Easy CD Creator and Toast, CeQuadrat WinOnCD, Ahead Nero, NTI CD-
Maker, and others). Refer to your premastering software documentation for details on
how to record a disc from an image file.
After having created a “Firmware Update CD”, perform the following steps to update the
CD-3000’s firmware:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Load the Firmware Upgrade CD into the top CD-R/RW recorder.
• Turn off the power to the 3000 Series.
• Turn on the power to the 3000 Series.
• The system will startup:
M F I N C .
D U P L I C A T I O N M A D E E A S Y
• You will see the “initializing system” screen:
I N I T I A L I Z I N G S Y S T E M
•
You will see the upgrade firmware screen:
U P G R A D E F I R M WA R E
[ S T O P ] = N O [ S T A R T ] = Y E S
• Press the “Start/Yes” key to upgrade the firmware.
U P G R A D I N G F I R M WA R E . . .
• Upon completion, the system will automatically reboot.
• Remove the CD at this time.
• You will then see the following screens:
F I R M WA R E U P G R A D E . . .
P L E A S E WA I T . . .