MIDI Solutions Merger - Manual (Page 3)

Thank you for purchasing the MIDI Solutions Merger.
The MIDI Solutions Merger merges two MIDI Ins to one MIDI Out, and may be chained together with other mergers
for as many inputs as required. The MIDI Solutions Merger is MIDI-powered and requires no batteries or power
supply to operate.
INTRODUCTION
Connect the MIDI Outs or Thrus of the sending MIDI devices to the MIDI inputs ( and ) of the Merger. Connect
the MIDI of the Merger to the MIDI In of the receiving MIDI device. Power is provided to the Merger by the device
that is connected to , if a device does not provide power it can be connected to . It is recommended that the
number of MIDI Solutions products chained together between any two MIDI devices be limited to four.
In1 In2
Out
In1 In2
The Merger's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever MIDI data
passes through the unit. All MIDI messages appearing at the MIDI inputs are merged to the MIDI output.
CONNECTIONS
OPERATION
3
Sending Device #2
MIDI Out or Thru
Sending Device #1
MIDI Out or Thru
Receiving Device
MIDI In
MIDI Solutions TM
Made in Canada
MIDI
Out
Merger
In2
In1 Power
MIDI Indicator LED