MIDI Solutions Thru - Manual (Page 3)

Thank you for purchasing the MIDI Solutions Thru.
The MIDI Solutions Thru provides two MIDI Thru outputs from one MIDI input, allowing additional MIDI outputs to be
added at any point in the MIDI chain. Active circuitry cleans up any skewing of the data bits that has occurred at the
input, resulting in accurate output signals. The MIDI Solutions Thru is MIDI-powered and requires no batteries or
power supply to operate.
INTRODUCTION
Connect the MIDI Out or Thru of the sending MIDI device to the MIDI of the MIDI Solutions Thru. Connect of
the MIDI Solutions Thru to the MIDI In of the first receiving MIDI device, and to the MIDI In of the second
receiving MIDI device. It is recommended that the number of MIDI Solutions products powered from a single MIDI
Out or Thru be limited to four.
In Thru1
Thru2
The MIDI Solutions Thru's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever
MIDI data passes through the unit. All MIDI messages appearing at the MIDI input are sent to Thru1 and Thru2.
CONNECTIONS
OPERATION
3
Device #1
MIDI In
Device #2
MIDI In
Sending Device
MIDI Out or Thru
MIDI Solutions TM
Made in Canada
MIDI
In
Thru
Thru1
Thru2
MIDI Indicator LED