MIDI Solutions Quadra Thru - Manual (Page 3)

Thank you for purchasing the MIDI Solutions Quadra Thru.
The MIDI Solutions Quadra Thru provides four MIDI Thru outputs from one MIDI input, allowing additional MIDI
outputs to be added at any point in the MIDI chain. Active circuitry cleans up any skewing of the data bits that has
occurred at the input, resulting in accurate output signals. The MIDI Solutions Quadra Thru is MIDI-powered and
requires no batteries or power supply to operate.
INTRODUCTION
Connect the MIDI Out or Thru of the sending MIDI device to the MIDI of the MIDI Solutions Quadra Thru. Connect
, , , and of the MIDI Solutions Quadra Thru to the MIDI Ins of the receiving MIDI devices. It
is recommended that the number of MIDI Solutions products powered from a single MIDI Out or Thru be limited to
four.
In
Thru1 Thru2 Thru3 Thru4
The Quadra Thru's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever MIDI data
passes through the unit. All MIDI messages appearing at the MIDI input are sent to Thru1, Thru2, Thru3, and Thru4.
CONNECTIONS
OPERATION
3
MIDI In
Receiving Device #2
MIDI In
Receiving Device #3
Sending Device
MIDI Out or Thru
MIDI In
Receiving Device #1
MIDI In
Receiving Device #4
MIDI Solutions TM
Made in Canada
MIDI
Thru1
In
Thru4 Thru3
Quadra Thru
Thru2 MIDI Indicator LED