MIDI Solutions T8 8-output MIDI Thru Box - Manual (Page 3)

Thank you for purchasing the MIDI Solutions T8 8-output MIDI Thru Box.
The MIDI Solutions T8 provides eight MIDI Thru outputs from one MIDI input, allowing additional MIDI outputs to be
added at any point in the MIDI chain. Active circuitry cleans up any skewing of the data bits that has occurred at the
input, resulting in accurate output signals. The MIDI Solutions T8 is MIDI-powered and requires no batteries or power
supply to operate.
INTRODUCTION
Connect the MIDI Out or Thru of the sending MIDI device to the MIDI of the T8. Connect the MIDI Thru outputs of
the T8 ( ) to the MIDI inputs of one or more receiving MIDI devices. It is recommended that no other
MIDI-powered products be connected to any of the T8's MIDI inputs or outputs.
The T8's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever MIDI data
passes through the unit. All MIDI messages appearing at the MIDI input are sent to each MIDI Thru output (
).
In
Thru1 - Thru8
Thru1 -
Thru8
CONNECTIONS
OPERATION
3
Sending Device
MIDI Out or Thru
MIDI In
MIDI In
MIDI In
MIDI In
MIDI In
MIDI In
MIDI In
MIDI In
Receiving Device #1
Receiving Device #5
Receiving Device #3
Receiving Device #7
Receiving Device #2
Receiving Device #6
Receiving Device #4
Receiving Device #8