Vertical Communications DSU II - Manual (Page 21)

Paging
Your system provides an all-call or a zone page feature that you access by dialing
special codes. This arrangement sounds your voice announcement through the
telephone speakers or through an external paging unit.
· If your system provides an external paging unit,
1. LIFT handset.
2. PRESS
INTERCOM AND CHOOSE one of the following
options:
• DIAL extension number of station equipped and enabled
for paging (see programming section of this user’s guide),
or
• PRESS paging button assigned by the installer, or
• DIAL
89
for special paging port.
3. MAKE announcement.
4. HANG UP to end.
· If your system provides all-call or zone paging,
1. LIFT handset.
2. PRESS
INTERCOM.
3. DIAL
87
for all-call, OR DIAL
84
,
85
, or
86
for zone 1, 2, or 3.
4. MAKE announcement.
5. STAY on line if awaiting a reply (known as Meet-Me page), OR
HANG UP to end.
· To make a reply to a Meet-Me page,
1. LIFT handset of nearest telephone.
2. PRESS
INTERCOM.
3. DIAL
88
.
Single Line Proprietary Telephone Station User’s Guide 15
GCA70-246 Making Calls