Milwaukee Tool 5303-20 - Manual (Page 3)

page 3
SPECIFIC SAFETY RULES
FUNCTIONAL DESCRIPTION
1. Side handle
2. Clamping screw
3. Depth guage
4. Trigger
5. Selector lever
6. Quik-Change spindle
7. Quik-Change chuck
2
4
5
6
7
1
3
1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2. Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Specifications
Rotary Hammer
(concrete)
No Load
RPM
0-880
No Load Blows
per Minute
4100
Cat.
No.
5303-20
Twist
Drill Bit
5/8" - 1-1/2"
Carbide Tipped
Percussion Bit
3/16" - 1-1/8"
Drill Only
(steel or wood) Tool
Thin Wall
Percussion Bit
3-1/2"
Capacities
Volts
AC
120
Amperes
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
No Load Revolutions per Minute