Symbology specifications functional description – Milwaukee Tool 2682-20 User Manual

Page 4

Advertising
background image

4

symbology

specificaTions

funcTional descripTion

Cat. No.

Volts DC

No Load RPM

Blade Size

Arbor

Depth of Cut

2682-20

18

3 600

5-3/8"

20 mm

1/8" to 2"

1. Front handle

2. Upper guard

3. Lock-off button

4. Trigger

• WARNING Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to filter out microscopic particles.

5. Handle

6. Shoe

7. Lower guard lever

8. Lower guard

9. Blade bolt

10. Blade flange

11. Blade

12. LED

1

2

3

5

4

6

7

8

9

10

11

15

16

14

13

13. Transparent front

guard

14. Spindle lock

button

15. Depth adjusting

lever

16. Wrench

12

Lower guard function

• Check lower guard for proper closing before

each use. Do not operate the saw if lower guard

does not move freely and close instantly. Never

clamp or tie the lower guard into the open

position. If saw is accidentally dropped, lower

guard may be bent. Raise the lower guard with the

retracting handle and make sure it moves freely

and does not touch the blade or any other part, in

all angles and depths of cut.

• Check the operation of the lower guard spring.

If the guard and the spring are not operating

properly, they must be serviced before use.

Lower guard may operate sluggishly due to dam-

aged parts, gummy deposits, or a build-up of

debris.

• Lower guard should be retracted manually

only for special cuts such as “plunge cuts”

and “compound cuts.” Raise lower guard by

retracting handle and as soon as blade enters the

material, the lower guard must be released. For

all other sawing, the lower guard should operate

automatically.

• Always observe that the lower guard is cov-

ering the blade before placing saw down on

bench or floor. An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever

is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

Volts

Direct Current

No Load Revolutions per Minute

(RPM)

C

US

Underwriters Laboratories, Inc.

United States and Canada

Advertising