Morley PRO SERIES WAH Silent Switching (PWA-SS) - Manual (Page 2)

FEATURES
• •
WAH level Control: This knob controls the
overall output level of the WAH effect. It does
not change the wah sweep or range.
•
WAH On/Off Switch: This switch turns the
WAH effect “on” or “off”. In the “off” mode the
pedal is in bypass.
• •
Electro-Optical: The amount of light from the
LED (Light Emitting Diode) that shines on the
LDR (Light Dependent Resistor) is controlled by
a shutter placed between the two devices. Our
unique electro-optical design ensures smooth
overall control of the WAH without unwanted
noise typical with potentiometer (pot) controlled
pedals.
• •
Silent Switching: To further enhance the
noiseless operation of our switchless design,
we’ve added FET silent switching. Offering
smooth and quiet transition between Wah and
Bypass modes, absent of the pops and clicks
associated with standard foot switches, this is
ideally suited for studio recording and live
performances.
• •
LED WAH On/Off Indicator: A red LED
located above the WAH switch serves as on
on/off indicator. When the LED is on, WAH is
engaged. When the LED is off, the pedal is in
bypass mode.
185 Detroit Street, Cary, IL 60013
Phone: (847) 639-4646
Fax: (847) 639-4723
www.morleypedals.com
Pro Series Pro Series
WAH
with Silent Switching
MODEL PWA-SS
OWNER’S MANUAL