Morley PRO SERIES WAH VOLUME (PWV) - Manual (Page 2)

FEATURES
• •
WAH level Control: This knob controls the
overall output level of the WAH effect. It does
not change the wah sweep or range
•
WAH On/Off Switch: This switch turns the
WAH effect “on” or “off”. In the “off” mode, the
pedal functions as a volume pedal.
• •
Electro-Optical: The amount of light from the
LED (Light Emitting Diode) that shines on the
LDR (Light Dependent Resistor) is controlled by
a shutter placed between the two devices. Our
unique electro-optical design ensures smooth
overall control of the WAH without unwanted
noise typical with potentiometer (pot) controlled
pedals.
•
• LED WAH On/Off Indicator: A red LED
located above the WAH switch serves as on
on/off indicator. When the LED is on, WAH is
engaged. When the LED is off, the pedal
functions as a volume pedal.
185 Detroit Street, Cary, IL 60013 Phone: (847) 639-4646
Fax: (847) 639-4723 www.morleypedals.com
Pro Series
WAH / Volume
Model PWV
OWNER’S MANUAL