Canon S900 - Manual (Page 35)

Printer Properties Dialog Box Description 35
Printer Driver Functions (Windows)
(3) Printhead Alignment
Click to align the printhead. For details, refer to the printed
Quick Start Guide .
(4) Nozzle Check
Click to print the nozzle check pattern to ensure that the printhead nozzles are
ejecting ink normally. For details, refer to “
Examining the Nozzle Check Pattern ”.
(5) Power Off
Click to turn the printer off.
(6) Auto Power
Click to enable the printer to turn off automatically when no data is sent to the printer
for a period of time, and to automatically turn the printer back on again when data is
sent to the printer.
(7) Custom Settings
Click to modify the printer mode. Change the settings in the Custom Setting dialog
box, then click Send to change the printer mode.
(8) Quiet Mode
Reduces the printing noise. However, the effect may be small, depending on the print
quality setting.
If you use Quiet Mode, the print speed may become slower than normal.
(9) Start Status Monitor
Click to start the BJ Status Monitor, which checks and reports the printer status and
the progress of printing jobs.