Casio PX200 User Manual

Page 6

Advertising
background image

E-4

General Guide

Normally when you press a button, it will change the
setting or perform the operation marked above the
button. Note that there also are secondary parameters
(settings) marked below some buttons that you can
select using the TEMPO/SETTING button.

• For details about the parameters you can configure

using the TEMPO/SETTING button, see
“Secondary Parameter Reference” on page E-26.

To select a secondary button parameter

1.

Press the TEMPO/SETTING button.

• This will cause the lamp below the TEMPO/

SETTING

button to flash.

• The GRAND PIANO 1/TEMPO button’s lamp also

will flash.

Example:

2.

Press the button that corresponds to the
parameter you want to select.

• This will cause the button’s lamp to flash.

Example: TRANSPOSE button

• If you want to adjust the tempo, you can skip this

step because the GRAND PIANO 1/TEMPO button’s
lamp will flash already.

3.

Use the

/NO and

/YES buttons to

change the setting of the selected parameter.

4.

After you are finished, press the TEMPO/
SETTING
button again.

• This will cause the TEMPO/SETTING lamp and the

lamp of the selected parameter button to go out.

Use the

/

NO

and

/YES

buttons to change a

displayed setting.

z

z

z

z Holding down either button changes the value at

high speed.
Example: See “Selecting a Various tone, GM tone, and

Drum set” on page E-9.

NOTE

• Pressing the

/NO

and

/YES

buttons at the same

time will return the displayed setting to its default.

Using the TEMPO/SETTING
Button

/NO Button and

/YES

Button

PX200_02_e.fm 4 ページ 2006年11月1日 水曜日 午前11時20分

Advertising