Nixeus Fusion XS - Manual (Page 11)

Nixeus Technology, Inc
11
1. Turn on the unit. The LED on the front panel of the Fusion XS will turn orange during system boot up
and then green when it’s ready.
Note: The default display of the unit is Composite (CVBS). If you use HDMI, cycle through the TV output
modes to get the correct display mode.
Wired Network Setup
The default network type on the unit is wired network. Please connect the supplied Ethernet cable to your
router and the Ethernet port of the Fusion XS.
1. Under Setup, you can check the Network status.
2. Select “Type”  Network Type: Wired. Select “IP”  IP address