NORAC UC5-BC-JD12 User Manual
Page 35
Advertising
32
3. Select the Boom Calibration tab (B).
4. Select the Calibration icon (C) next to Tilt Sensor Calibration.
5. The Boom Tilt Sensor Calibration screen will appear.
Figure 31: Tilt Sensor Calibration Screens
6. Follow the instructions on the first screen. When finished, select the Cal icon (A) to
proceed to the next screen.
7. Follow the instructions on the second screen. When finished, select the Cal icon (A) to
proceed to the next screen.
8. “Calibration Complete” will be displayed. Press the Enter button (B) to return to the Boom
Calibration tab.
Advertising