NOYAFA NF-468 User Manual
Test by BNC ( NF-468B/NF-468BL)
1. Switch on the power, choose"ON" or "S", the power light
will turn on.
2. Connect R 45 port of BNC adapter with remote tester. then
insert one end of BNC cable into BNC port of main tester,
the other end into BNC connector. The lights of the main
tester and remote tester will turn on sequently from 1 to 2
3. If the cable is breakage, disorder, short circuit, the result is
as what was said above.
4. After operation, turn off the tester.
NF-468B Main Tester
NF-468B Remote Tester
BNC to RJ45
Your excellent helper in cable test!