NOYAFA NF-168 - Manual (Page 10)

Hunting test
Network line (as below)
1. Open battery cover, install DC 9V battery in launcher, push the key
to “scan”, its indicator flashes, which means the transmitter work well.
2. Connect one end of telephone line to the RJ11 port of launcher.
3. push the key to “scan” of receiver, then its indicator flashes, which
means the receiver is normal. then hold the receiver to find the
target line.
4. In the process, press the button of “Set” to choose your ideal volumn.
Note: Never put a telephone cable into RJ45 Port, especially a
charged one, for fear of burnout to the tester
1. Open battery cover, install DC 9V battery in launcher, push the key
to “scan”, its indicator flashes, which means the transmitter work well.
2. Connect one end of network line to the RJ45 port of launcher.
3. push the key to “scan” of receiver, then its indicator flashes,
which means the receiver is normal. then hold the receiver to find
the target line.
4. In the process, press the button of “Set” to choose your ideal volumn.
Telephone line(as below)
Your excellent helper in cable test! 06