NOYAFA NF-806R - Manual (Page 4)

F
in
d w
ir
e o
n s
w
it
c
h
Connect emitter with the
telephone line to be found Trace cable with receiver at
the other end
Connect emitter with the
telephone line to be found Trace cable with receiver at
the other end
CASE
CASE
Telephone cable tracing function
1. Directly insert telephone wire with RJ11 plug into the RJ11 socket of e mitter;
(
Note: Never put energized telephone cable into RJ45 port, in fear of burnout to the tester)
2. Push DIP switch of emitter to position of“SCAN”then wire finding indicator
“STATUS”flashes, which means normal work of emitter;
3. Press the inching button, use the probe of receiver to find target wire at the other end;
4. During testing, function switchover button can be pressed for switchover of dual-tone.
Your excellent helper in cable test! 02
Find
wire
on
patch
panel