NOYAFA NF-HDMI - Manual (Page 2)

Your excellent helper in cable test! 01
DESCRIPTION
The Noyafa NF-HDMI HDMI Cable Tester is designed for
professional HDMI installations. This portable device allows
installers to quickly test, troubleshoot, and verify HDMI (high
definition multimedia interface) cables.NF-HDMI is designed
to test wire circuit state of HDMI cables with Type A & C
connectors conforming to 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b,
1.3c, 1.4, 1.4a Category 1 and Category 2 cables.
Equipped with 3 test modes, Automatically fast/slow scan
or manual test for step by step, this tool can either test the
conductors in straight、short、open、crossover in all RGB
conductors.
SAFETY INFORMATION
Safety is essential in the use and maintenance of
NOYAFA equipment. This instruction manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of
this tool. Observe all of the safety information provided.
Warnings
Do not connect tester to a live circuit as it may
damage the unit.
It is easy to damage this tester with charged HDMI lines.
●
●
Caution
Read all instructions in this manual before using this
tester. Failure to do so may result in damage to the tester
or injury to the user.
Do not drop or get the unit wet. Do not expose tester to
extreme humidity or direct sunlight.
●
●