Patient - carl, Warning, Directions for use – Oakworks Spine Positioning System User Manual
Page 16
d
ire
CT
ions
for
u
se
14
directions for use
patIent - carl
Configuration of the SPS for positioning Carl.
Carl in the SPS while obtaining an
AP image of the mid-thoracic spine.
Carl
AP image of the mid-thoracic spine
for planning the trajectory for a left
thoracic facet injection.
Right thoracic oblique image to visualize the
trajectory for a transforaminal injection.
Contralateral oblique showing the
trajectory for targeting the mid-
thoracic facet joint.
components used:
Platform Frame (1), Crescent Face Cushion (1), Contoured Torso Support Pad (1), Small Contoured
Torso Wedge (1), 7” x 12” Rectangular Adjuster Pad (1), 8” x 16” Rectangular Adjuster Pad (2), 8” Semi-Round Bolster (1)
Warning
A patient safety strap must be used for all procedures.
See warnings on page 2.