Clarity Amplified Big Button Corded Phone with Digital Answering Machine E814 - Manual (Page 21)

21
using your e814
In idle:
4. Press <UP>; display shows “Entries in DIR” briefly, then displays the first entry in
alphabetical order; press <UP/down> to select the desired entry.
Delete a Directory entry
In idle:
1. Press <UP>
–OR–
2. Press <oK/menU>, then <UP> or <down> to select Directory;
press <oK/menU> to enter the directory menU.
3. Press <UP/down> to see Review.
4. Display shows “Entries in DIR” briefly, then displays the first entry in alphabetical
order; press <UP/down> to select the desired entry to be deleted.
5. Press < X > and display shows “Delete contact?”.
6. Press <oK/menU> to confirm or <cLear/mUte> to cancel.
assign speed Dials
Your corded base has 9 speed dial available, corresponding to keys “0, 2-9” on your
numeric dial pad. When these speed dial locations are set up, you can dial these numbers
by press-and-holding the numeric key. For example – to dial the number set up in speed
dial 4, press and hold key “4” for 2 seconds. To set up the speed dial buttons, you must
first add that number/contact to the directory.
In idle:
1. Press <oK/menU>, then <UP> or <down> to select Directory; press
<oK/menU> to enter the directory menU.
2. Press <UP/down> to see Speed dial.
3. Display shows the first speed dial location, 0; press <up> or <down> to see all avail-
able locations. The available (not yet set) locations will show <unassigned>; the set
locations will show the name of the contact. Press <oK/menU> to select a speed
dial location.