OmniSistem PR Design 150 Pro - Manual (Page 19)

Design 150 PRO EN doc 19/26
z
How to use Timer Modes to control the projector?
If the user needs to switch on the projector at 20:00, and switch off at 23:00.
The process
provided in the following figure.
Timer Modes Start 1=20:00
Set Start 1 to:
Start By Time Set Start 1
Time Hour=20
ENTER
Timer Modes Stop 1=23:00
Set Stop 1 to:
Start By Time Set Stop 1
Time Hour=23
ENTER
z
How to use Light Level Sensor？
If the user needs to switch on the projector as soon as the Light Level reaches at level 10, and
switch off at level 20.
The process provided in the following figure.
Light Level
Sensor Light Level On
Set Point
Set By Entering
Light Lever
ENTER On Light
Lever=10
Light Level
Sensor Light Level On
Set Point
Set By
Entering Light
Level
ENTER On Light
Level=20
USER GUIDE