OmniSistem PR XL 575 - Manual (Page 14)

14/24
12 13 16 Zoom 000-255 From large to small
17 Zoom Fine 000-255 Zoom in 16 precision
13 14 18 Pan 000-255 Pan rotation 450°
15 19 Pan Fine 000-255 Pan rotation in 16 precision
14 16 20 Tilt 000-255 Tilt rotation 270°
17 21 Tilt Fine 000-255 Tilt rotation in 16 precision
18 22 Pan & Tilt
speed
000-255 Pan&Tilt speed from fast to slow
000-048 Reserved
049-080 Reset
081-112 Reserved
113-144
Lamp off ( stop in DMX value for 10 s)
145-168 Reserved
169-200
Lamp power reduced to 50%
201-223 Reserved
15 19 23 Control
224-255 Lamp on (See remark below)
Remark:
If you intend to turn on/off the lamp via the last channel of the controller, don’t attempt to push the channel to value
224-255 immediately after turning it off, or push the slide bar to value 224-255 to wait it cooling. Under these 2
circumstances, the lamp can not be turned on. The right operation is: turn it off---cool down---push the slide bar to turn it
on.