OmniSistem Beta 3 – EC2402 - Manual (Page 10)

8
Press copy and enter the screen of parameter copy, and then copy the present
parameter to another channel, see the following:
Press the choosing channel to choose the present channel,(the aim channel will
choose another channel in one group) ,press +/-to choose the copy parameter ,after
choosing, repress copy button to confirm the copy one.
Parameter range: ALL---copy all the parameter of the present channel;
EQ---copy the parameter balanced setting of the channel;
XOVER---copy the setting of crossover of the present channel;
Gain---copy the gain setting of the present channel;
Limit---copy limitation setting of the present channel;
Delay---copy the delaying setting of the present channel.
7.9 Copy
Choose the present
channel
Choose the aim channel
automatically
choose parameter
7.10 Recall Program
Press Recall and enter the recall screen of previous program (if using the present
channel, just give up the present edited parameter, and then recover the original setting),
see the following:
Program No.
Program name
Press +/-to choose the adjustable program, and then press Recall to confirm recall.
7.11 Store Program
Press Store and enter the protecting screen of previous program, we can keep the
present program or put the present program into different program No. or program name.
See the following:
Program No.
Program name
Press Para to choose present parameter ---program No., press +/- to store new program No. ;
Press Para to choose present parameter---program name, press+/- to enter program name,
press Para pad
After finishing setting, repress store and confirm storing.
7. DISPLAYS AND OPERATION