Upgrade the firmware – On Networks N300RE User Manual User Manual
Page 23
Extender Network Settings
23
N300RE WiFi Range Extender
Your changes are saved.
To recover your password:
1.
In the address field of your browser, type www.mywifiextender.net.
A login window displays.
2.
Click Cancel.
If password recovery is enabled, you are prompted to answer two security questions.
3.
Enter the saved answers to the security questions.
Upgrade the Firmware
You can check for firmware. If new firmware is available, you can upgrade the extender.
To upgrade the firmware:
1.
Select Maintenance > Firmware Upgrade.
2.
Click Check to see if new firmware is available.
3.
If new firmware is available, follow the onscreen prompts to download it onto your computer.
4.
Use the Browse field to locate and select the new firmware.
5.
Click Upload to install the new firmware on your extender.
The firmware upgrade begins.
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes upgrading.
The extender restarts.