Lan ports – On Networks N150RM User Manual User Manual
Page 32
Modem Router Setup
32
N150 Wireless ADSL2+ Modem Router N150RM
3.
Click Apply to save the settings.
LAN Ports
The LAN Ports screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and
to act as a DHCP server. The modem router’s default LAN IP configuration is:
•
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.
To change the LAN settings:
Note:
If you change the LAN IP address of the modem router while
connected through the browser, you will be disconnected. You will
have to open a new connection to the new IP address and log in
again.
1.
Select Setup > LAN Setup.
2.
Enter the settings that you want to customize. These settings are described in the following
section,
.
3.
Click Apply to save your changes.