Philips 30PW862H User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO U
se
the
A
udio
O
ut
C
ontrol
D))
If you have connected the TV s AUDIO
1
OUTPUTjacks to the A UDIO INPUTjacks
on a stereo receiver (see page 12 for connec
tion instructions), set AUDIO OUT to either
VARIABLE or FIXED to determine whether
you adjust the volume at the stereo or at the
TV If you select VARIABLE, change the vol
ume at the TV using the TVs remote control
If you select FIXED, adjust the volume at the
stereo using the stereo s controls. To select
FIXED or VARIABLE, follow these steps.
1
2
3
4
5
6
Press the MENU button on the
remote control to show the onscreen
menu.
Press the CURSOR DOWN button
once to highlight SOUND.
Press the CURSOR RIGHT button
and the menu will shift to the left.
TREBLE will be highlighted and an
adjustment bar will be shown to the
right.
Press the CURSOR DOWN button
repeatedly until AUDIO OUT is high
lighted.
Press the CURSOR RIGHT or CUR
SOR LEFT button to select FIXED or
VARIABLE.
Press the STATUS/EXIT button to
remove the menu from the screen.
H
elpful
H
int
FIXED - If FIXED is selected, the sound
coming from the TV and being heard
through an external audio system is not
adjustable with the television’s volume con
trols. The volume would have to be adjusted
at the audio system.
VARIABLE - If VARIABLE is selected, the
sound coming from the TV and being heard
through an external audio system can be
adjusted at the TV using the Volume + or -
buttons on the television or remote control.
Remember, the connection instructions for an
external audio system is located on page 13.
17