Cd mode operations, 15 english, Caution – Clarion DB258R User Manual

Page 13

Advertising
background image

15

English

DB258R

RDS Operations

Emergency broadcast

If an emergency broadcast is received, all the func-
tion mode operations are stopped. “ALARM” ap-
pears in the display and the emergency broad-
cast can be heard.

•••••

Cancelling an emergency broadcast

If you press the [AF] button, emergency broad-
cast reception is cancelled.

Volume setting of TA, emergency
broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.

∗

The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob clockwise or counterclockwise to
set the volume to the desired level (0 to 33).

∗

When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.

CD Mode Operations

Loading a CD

1. Press the [OPEN] button to access the CD

SLOT behind the FLIP DOWN PANEL.

2. Insert a CD into the center of the CD SLOT

with the label side facing up. The CD plays
automatically after loading.

Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there maybe an-

other CD in the mechanism or the unit may require

service.

• Discs not bearing the mark and CD-ROMs

cannot be played by this unit.

• Some

CDs recorded in CD-R/CD-RW mode may

not be usable.

Listening to the disc already inserted

Press the [SRC] button to select the CD mode,
the CD will start playing.

Stopping (Pausing) playback

While the CD playing pressing the [ ] button
will stop the CD and “PAUSE” indicate.

Press the [ ] button again to resume play-
back.

3. Close the FLIP DOWN PANEL.

CAUTION

!

Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully, gen-

tly open with your hand.

• After loading a CD, always close the FLIP DOWN

PANEL.

Ejecting a CD

1. Press the [OPEN] button to open the FLIP

DOWN PANEL.

2. Press the [ ] to eject the CD. Take it out from

the ejected position.

3. Close the FLIP DOWN PANEL.

∗

If a CD is left in the ejected position for 15 seconds,
the CD is automatically reloaded (Auto reload).

Notes:
• If you force a CD into before auto reloading, this

can damage the CD.

Advertising