Canon MF4200 - Manual (Page 22)

1
2
3
4
TOP
Back Previous Next
2-8
Introduction
Scanning a
Document
Troubleshooting
Appendix
Table of Contents
Index
4. Specify the required settings.
For details, see “MF Toolbox Settings,” on p. 2-9.
If you want to keep the same settings for future scans, click
[Apply] before clicking [Start].
NOTE
With [Scan-1] and [Scan-2] buttons, you can set the different
settings for each. If you save the settings by clicking [Apply], the
settings will be effective next time.
5. Click [Start].
If you select [Display the Scanner Driver] in step 4, the
[ScanGear MF] dialog box will appear.
6. Specify the required settings.
For details, see “Setting Preferences and Scanning with
ScanGear MF,” on p. 2-18.
7. Click [Scan].
When scanning is completed, a folder with the scanning date will
be created in the [My Pictures] folder in the [My Documents]
folder, and your document will be saved in this folder.(In VISTA,
the folder will be created in the [Pictures] folder.)
If you have applications registered to the [Mail], [OCR], [PDF],
[Scan-1], or [Scan-2] buttons, the scanned image will be
displayed in the application or attached to an e-mail message
after scanning. For details, see “External Program (Mail
Program),” on p. 2-13.
For some models, the CD-ROM provided with the machine
contains the following applications which can be used with the
MF Toolbox. They will be registered in the MF Toolbox buttons at
the time of installation.
[OCR]: ScanSoft OmniPage SE
[PDF]: Presto! PageManager
NOTE
ScanSoft OmniPage and Presto! PageManager are not
supported on Windows XP 64-bit version.