Crossbar mounting bracket installation, Canopy installation, Canopy hardware – Casablanca Fan Company Victorian Ceiling Fan 63XXT User Manual

Page 4

Advertising
background image

4

CAUTION: To reduce the risk of

personal injury, use only the

mounting hardware provided with

the approved outlet box to install

the crossbar mounting bracket.

CROSSBAR MOUNTING BRACkET INSTALLATION

CEILINg

wIRINg

CROSSBAR

mOUNTINg

BRACKET

FLAT

Washer

gREEN

gROUND

wIRE

CEILINg FAN

approVeD

wIRINg BOX

RIDgE

SIDE

DOwN

CANOPY INSTALLATION

canopy lock

Washer

canopy

SCREw

CROSSBAR

mOUNTINg

BRACKET

canopy

CANOPY HARDWARE

canopy

canopy

hatch

canopy lock Washer (4)

canopy screW (4)

approVeD

OUTLET BOX

harDWare

noTe: On sloped ceilings, align the

canopy opening towards the top or

room peak.

proceed with installation as follows:

Step 1. Route the wires from the ceiling outlet box through

the crossbar mounting bracket center hole. Attach the

bracket, with ground wire and ridges down, to the ceiling

fixture outlet box with the mounting hardware included with

the outlet box.

Tighten the screws firmly by

hand only, being careful not to

bend the bracket by over tightening.

Step 2. Attach the canopy to the crossbar mount-

ing bracket with three of the 8-32 x 2

1

/

4

″ long

canopy screws and canopy lock washers.

Tighten the screw firmly by

hand only.

Advertising