Canon DR-6080 - Manual (Page 17)

14
Chapter 1 DR-6080/9080C
◆ Rear View
Air Vent
Power Cord Connector
Connect the power cord provided with
the scanner to this connector.
Connectors
To avoid overheating and causing a fire, never block the air vents on the rear of the
scanner.
◆ Connectors (Bottom View)
SCSI Connectors
Connect a half-pitch 50 pin (pin type)
SCSI cable. (See p.19.)
USB Connector
Connect a Hi-Speed USB 2.0
compatible cable. (See p.22.)
DIP Switch
This switch is for setting the SCSI ID
and turning ON or OFF the terminator.
(See p.20.)
CAUTION