Crimestopper Security Products CS-2205 - Manual (Page 32)

32
REMOTE TRANSCEIVER DIAGNOSTICS
You may refer to the following statement once the security system with no action while you press the 2-way LED remote
control transceiver button,
REMOTE SOUND from remote transceiver LED on the remote transceiver Condition
One “bi” sound while pressing the button of the
remote control transceiver 1st Car Operation
Two “bi” sounds while pressing the button of the
remote control transceiver 2nd Car Operation
No “bi” sound while pressing the button of the
remote control transceiver / / Z / LED will pause flashing at
the same time for 3 seconds
Button Lock Mode
No “bi” sound while pressing the button of the
remote control transceiver LED pause flashing for 10 seconds Low Battery
No “bi” sound while pressing the button of the
remote control transceiver Power Save Mode
2 nd Car Operation Two “bi” sounds while pressing the button of the remote control transceiver
www.crimestopper.com
[email protected]
Phone (800) 998-6880
FAX (805) 581-9500
© 2005 Crimestopper Security Products
ONLINE TECHNICAL SUPPORT
www.crimestopper.com